Table of Contents
Advertisement
Chapter 4
Driver Installation for Windows 98
Installing the PCMCIA 10Mbps Ethernet Card is similar as any normal
Windows 95 Plug & Play device. Follow the steps below to install.
1. Insert the PCMCIA 10Mbps Ethernet Card into an open PCMCIA slot on
your notebook.
2. After Windows 98 detects the PCMCIA 10Mbps Ethernet Card, the Add
New Hardware Wizard window, as shown in Figure 4.1, will appear. Click
to continue the installation.
Next
3. Select Search for the best driver for your device. [Recommended] and
click Next.
Figure 4.1 Add New Hardware Wizard
7
Advertisement
Table of Contents
