4.10.3 DME Tuning Configuration
Refer to Section 5.3.14 for the DME tuning configuration.
4.10.4 DME Tuning Calibration and Checkout
None.
4.10.5 DME Tuning Interconnect References
Refer to Appendix H for interconnect information.
For the GNS 430W to tune a Narco DME 890 or IDME 891 or an ARC (Cessna)
RTA-476A using parallel 2 of 5, unique wiring and configuration are required. Refer to
5.3.14 and Figure H-24.
Page 4-22
Rev. G
NOTE
400W Series Installation Manual
190-00356-02