Resizing Originals By Entering A Scaling Value (Mac Os) - Canon IPF850 User Manual

Resizing Originals by Entering a Scaling Value (Mac OS)

6
Click the Page Setup tab to display the Page Setup
sheet.
7
Select and click a roll paper in the
8
Select the width of the loaded roll in the
(420.0mm).
9
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO
A4.
10
Select the
11
Click ISO A4 in the
12
F
Click Scaling and enter 120.
Note
13
Confirm the print settings and print as desired.
80
Note
Resizing Originals by Entering a Scaling Value (Mac OS)
Resizing Originals by Entering a Scaling Value (Mac OS)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
L
C
Enlarged/Reduced Printing check box.
G
Paper Size list.
•
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and
right edges of the paper will not be printed.
• If the original size after enlargement or reduction is
smaller than the paper size, the original is printed in
the upper-left corner. In this case, you can center
E
originals by selecting Print Centered on the Lay-
out sheet.
•
For tips on confirming print settings, see "Confirming Print Settings ."
Paper Source list.
M
Roll Paper Width list—in this case, ISO A2/A3 Roll
P.161
➔
User's Guide
iPF850