Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets; Paper Is Not Cut Neatly; Paper Is Not Cut - Canon IPF850 User Manual

Roll paper cannot be inserted into the Paper Feed Slot

8
In a crouching position, push the Roll Unit in.
9
Turn the printer on. (See "Turning the Printer On and Off.")
Roll paper cannot be inserted into the Paper Feed Slot
Roll paper cannot be inserted into the Paper Feed Slot
The roll paper is warped.
Paper is jammed by the paper feed slot.
The paper source selection is incorrect.
If paper cannot be advanced from Roll 2 (Lower),
the Roll Unit Cable is disconnected.

Cannot load sheets

Cannot load sheets
Cause
The paper source selection is incorrect.

Paper is not cut neatly

Paper is not cut neatly
The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position be-
fore it is cut.
You are using paper that cannot be cut with the
Cutter Unit.
Cut Speed is not configured correctly in the
Control Panel menu.
During cutting, printed documents fall out at an
angle.

Paper is not cut

Paper is not cut
In the printer driver, No or Print Cut Guideline is specified in
628
Automatic Cutting.
In the Control Panel menu, Cutting Mode is set to Eject or
Manual.
Cause
Press the Load button and select the paper source.
Cause
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors or
a cutting tool to cut the roll after printing.
Change the Cut Speed setting in the Control Panel menu.
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after
printing, as they are cut.
Cause
P.17
➔
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Press the Load button and select the paper source.
Connect the Roll Unit Cable firmly to the Roll Unit Power Supply Inlet and the
inlet on the roll unit.
Corrective Action
(See "Specifying the Cutting Method for Rolls.")
(See "Menu Structure.")
P.443
➔
(See "Specifying the Cutting Method for Rolls.")
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet (Windows).")
(See "Paper Detailed Settings Dialog Box (Mac OS).")
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.")
Corrective Action
P.619
➔
P.622
➔
Corrective Action
P.360
➔
P.360
➔
Corrective Action
P.177
➔
iPF850
P.276
➔
P.360
➔
User's Guide