Table of Contents
Advertisement
Registering a Gigaset 2000 C handset
h
.
s
Settings
s
Registration
s
Station 1
Í
s
Registration
~
OK
s
INT11: Int.11
Registering a Gigaset 2000S / Gigaset 1000 C/S handset
For the registration procedure described below:
You can register a maximum of four other handsets (e. g. Gigaset 2000S, GAP handsets)
or wireless devices (e. g. Gigaset 1000 TAE, STA). Register these devices first.
Registering a Gigaset 2000S handset
h
o h
o
#
The lowest free internal number is assigned. It is not possible to select a free internal
number.
Registering a Gigaset 1000 C/S handset
For the registration procedures, please refer to the corresponding operating instruc-
tions.
Press to turn on the handset.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1-4) and confirm.
OK
Open the submenu.
Select the menu item and confirm.
OK
Enter the system PIN of the base
(factory setting: 0000) and confirm.
Press lit Register key on the base for approx.
4 seconds (page 12); the key flashes. The base is
only ready for registering while the key is flashing.
Select internal number and confirm,
OK
e. g. INT11: Int.11. The successful registration
is confirmed on the display.
h
Press
(off).
Simultaneously press the number of the base station
h
and
(on).
Enter system code and press the hash key.
Press lit Register key on the base for approx.
4 seconds (page 12); the key flashes. The base is
only ready for registering while the key is flashing.
Getting started
17
Advertisement
Table of Contents
