Table of Contents
Advertisement
Registering a Gigaset 4000 Comfort/Micro handset
a
either ...
OK
or ...
G
Settings
G
Register H/Set
G
Base
... then
~
OK
s
INT11: Int.11
Registering a Gigaset 4000 Classic handset
i
You can register a maximum of four Gigaset 4000 Classic handsets.
Register Gigaset 4000 Classic handsets before other handsets.
MENU
s
Register H/Set
~
OK
Once the system PIN has been entered the handset searches for a base with this PIN.
While it is searching Register H/Set flashes in the display. After registration the handset
reverts to idle status. Your handset is now ready for operation!
The next unassigned internal number between Int.11 and Int.18 is automatically
assigned to the handset as it is registered.
Hold down, to turn on the handset.
Confirm the prompt.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e. g. Base 1.
OK
Enter the system PIN of the base (factory setting:
0000) and confirm.
Press lit Register key on the base for approx.
4 seconds (page 12); the key flashes. The base is
only ready for registering while the key is flashing.
Select internal number and confirm,
OK
e. g. INT11: Int.11. The successful registration
is confirmed on the display.
Open the menu.
Select the menu item and confirm. PIN is displayed.
OK
Enter the system PIN of the base (the default is 0000)
and confirm.
Press lit Register key on the base for approx.
4 seconds (page 12); the key flashes. The base is
ready for registering only when the key is flashing.
Getting started
15
Advertisement
Table of Contents
