Table of Contents
Advertisement
Getting started
Registering a Gigaset 3000 Comfort/Micro handset
−
either ...
YES
or ...
.
s
Stations
s
Station 1
s
Registration
... then
~
OK
s
INT11: Int.11
The next unassigned internal number between Int.11 and Int.18 is automatically
assigned to the handset as it is registered.
Registering a Gigaset 3000 Classic handset
−
¦ ¨ «
~
OK
~
OK
s
INT11: Int.11
16
Hold down, to turn on the handset.
Confirm the prompt.
Open the menu.
Select the menu item and confirm.
OK
Í
Select the base (1-4) and open the sub-menu.
Select the menu item and confirm.
OK
Enter the system PIN of the base
(factory setting: 0000) and confirm.
Press lit Register key on the base for approx.
4 seconds (page 12); the key flashes. The base is
only ready for registering while the key is flashing.
Select internal number and confirm,
OK
e. g. INT11: Int.11. The successful registration
is confirmed on the display.
Hold down, to turn on the handset.
Press in turn.
Enter the number of the base (normally 1) and con-
firm. The Standby symbol
up constantly when the connection to the base has
been established.
Enter the system PIN of the base
(factory setting: 0000) and confirm.
Press lit Register key on the base for approx.
4 seconds (page 12); the key flashes. The base is
only ready for registering while the key is flashing.
Select internal number and confirm,
OK
e. g. INT11: Int.11. The successful registration
is confirmed on the display.
C
flashes and then lights
Advertisement
Table of Contents
