The Position Of Thread Guide Bar; Attaching The Spool Holder Cap And Net - ELNA 664 Pro Instruction Manual

2
1
1
1
2

The Position of Thread Guide Bar

1
Pull the thread guide bar up as far as it will go.
Turn the thread guide bar so that the thread
guides are right above the spool pins.
3
4
3
2
2. If the thread slips down from the spool
2
9
1 Thread guide bar
2 Thread guide
3
Stoppers
4 Spool pin
* Make sure the two stoppers on the thread guide
shaft, as shown, are set in at the correct position.

Attaching the Spool Holder Cap and Net

1. When you use a small thread spool, pull out the
spool holder from the spool pin. Then place the
spool and put the spool holder cap on top of it.
1 Spool holder
Spool pin
2
Spool holder cap
3
during threading and/or sewing, put a net on the
spool as illustrated to prevent jamming.
1 Net
2 Spool pin