Execute A Macro - Silvercrest SFB 10.1 A1 Operating Manual

5. By default the Macro commands are sent in intervals of
1 every second. Since many devices react sluggishly it is
possible that the sequence of the Macro commands are
sent too quickly to the device. Then you have the option
of programming, before a button command, a pause
of between 5 - 21 seconds. For this purpose press, if nec-
essary repeatedly, the MACRO button
and to the right the LCD display
pause length in seconds.
After input of the 16th button command, "FULL"
appears in the LCD display
to the AV input => switch on DVD => PAUSE => Playback
DVD.
=>
=>
Switch on TV => PAUSE => switch
=> (Pause time) =>
(Pause time) =>
. Below
shows the current
.
=> =>