Table of Contents
Advertisement
Landing Zone
Shows the number of landing zone per track. This item is not configurable.
Sector
Shows the number of sectors per track. This item is not configurable.
After entering the IDE hard disk drive information into BIOS, use a disk
utility, such as FDISK, to partition and format new IDE hard disk drives.
This is necessary so that you can write or read data from the hard disk.
Make sure to set the partition of the Primary IDE hard disk drives to
active.
2.3.6
HDD SMART Monitoring [Disabled]
Allows you to enable or disable the HDD Self-Monitoring Analysis and
Reporting Technology (SMART) feature.
Configuration options: [Disabled] [Enabled]
2.3.7
Installed Memory
Shows the size of installed memory.
2.3.8
3.8
Usable Memory y
Usable Memory
Shows the size of usable memory.
2-20
Chapter 2: BIOS setup
Hide quick links:
Advertisement
Table of Contents
