Hdd Smart Monitoring; Installed Memory; Usable Memory - Asus P5G-TVM Manual

Capacity
Displays the auto-detected hard disk capacity. This item is not configurable.
Cylinder
Shows the number of the hard disk cylinders. This item is not configurable.
Head
Shows the number of the hard disk read/write heads. This item is not
configurable.
Sector
Shows the number of sectors per track. This item is not configurable.
PIO Mode [Auto]
Sets the PIO mode for the IDE device.
Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3]
[Mode 4]
UDMA Mode [Auto]
Disables or sets the UDMA mode. Configuration options: [Disabled] [Auto]
Transfer Mode
Shows the Transfer mode. This item is not configurable.
After entering the IDE hard disk drive information into the BIOS, use a
disk utility, such as FDISK, to partition and format new IDE hard disk
drives. This is necessary so that you can write or read data from the
hard disk. Make sure to set the partition of the Primary IDE hard disk
drives to active.
2.3.5 HDD SMART Monitoring [Disabled]
Allows you to enable or disable the HDD Self-Monitoring Analysis and
Reporting Technology (SMART) feature.
Configuration options: [Disabled] [Enabled]
2.3.6

Installed Memory

Shows the size of installed memory.
2.3.7

Usable Memory

Shows the size of usable memeory.
2-8 Chapter 2: BIOS setup