Setting The Date And Time - Omron BP760 Instruction Manual

Set the monitor to the current date and time before taking a
measurement for the first time. If the date and time are not set correctly,
the measurement values stored in the memory and the average values
may not be correct.
If the date and time are not set, "-:--" appears during or after
measurement.
The Blood Pressure Monitor automatically stores up to 60 measurement
values with the dates and times. The monitor also calculates weekly
averages for measurements in the morning and in the evening. Morning
and Evening averages are stored for this week and the last seven weeks.
The monitor can also calculate an average reading based on the three
most recent measurements taken within 10 minutes of the last reading.
• If only two readings are stored in the memory for the 10-
NOTE:
• If one reading is stored in the memory for the 10-minute
This Manual: http://www.manuallib.com/file/2664239

SETTING THE DATE AND TIME

minute period, the average is based on the two readings.
period, this reading is displayed as the average.
19