Table of Contents
Advertisement
S E T U P
M E N U
O P T I O N S
Video Output Setup
The Video Output Setup section of the Setup Menu allows you to configure video output options.
1. Picture Adjustment: Adjusts picture control settings. The BDT-101CI provides a wide array of
picture controls. Please refer to the Picture Adjustment section on page 35 for details about
each control.
2. Output Resolution: Allows you to choose the output resolution that best matches your
television's native resolution.
Auto (default) – Automatically set the optimal output resolution.
Custom – Set the output resolution to a custom resolution as specified by the Custom
Resolution setup item below.
3. Custom Resolution: Allows you to choose a custom resolution. For a detailed description on
how to choose a proper output resolution, please refer to the Select the Best Output
Resolution section on page 37 of this manual.
4. HDMI Video Zone: Configure video output zone options.
1=Auto, 2=Main (default) – Select HDMI 2 as the Main Video Zone. The player will
configure its video processor to ensure that HDMI 2 gets the best possible video quality
using the specified output resolution, while automatically setting the output resolution for
HDMI 1 based on the display's capability and the content being played.
1=Main, 2=Auto – Select HDMI 1 as the Main Video Zone. The player will configure its
video processor to ensure that HDMI 1 gets the best possible video quality using the
specified output resolution, while automatically setting the output resolution for HDMI 2
based on the display's capability and the content being played.
1=2=Main – Select both HDMI 1 and HDMI 2 as the Main Video Zone. The player will
configure its video processor to ensure that both HDMI 1 and HDMI 2 get a proper video
signal. The output may not be the best possible signal that could have been supported by
each individual display device connected to the HDMI ports, but is the best that is
commonly supported by both. Please note that a Custom Resolution may not be
compatible with both display devices, so make sure you leave the Output Resolution
setting as Auto, or select a Custom Resolution that is supported by both display devices.
NOTE
32
Advertisement
Table of Contents
