Connecting To A Tv And A/V Receiver Via Dual Hdmi - Oppo BDT-101CI Installer Manual

Hide thumbs Also See for BDT-101CI:

Table of Contents

C O M M O N

C O N N E C T I O N

Connecting to a TV and A/V Receiver via Dual HDMI



If the BDT-101CI is equipped with an additional HDMI output module, it is possible to set up a

"Dual HDMI" connection to make sure you can enjoy the highest possible video quality and

resolution, in addition to high bit rate audio content. You can use an HDMI cable to connect the

HDMI 2 output to your HDTV and use another HDMI cable to connect the HDMI 1 output to your

receiver. In the Setup Menu, set the HDMI Video Zone option to "1=Auto, 2=Main" and set the

HDMI Audio Zone option to "1=Main, 2=Off" (see page 41 for details).



This configuration is recommended when you have a 3D or UHD compatible display, but your

receiver is not 3D or UHD compatible. This allows you to send the video signal (3D or UHD in this

case) directly to the TV and the audio signal to the receiver.

NOTE



Please refer to the notes on HDMI connections available on page 18.



If your receiver does not have HDMI audio input capability, please try the alternate

connection methods discussed on pages 21 and 22.

M E T H O D S

Table of Contents