Table of Contents
Advertisement
O P T I O N A L
M O D U L E
Step 3: Place the 7.1ch analog audio output module into position. Align the screw mounting holes
properly.
Step 4: Install the 4 screws with washer (A02) to secure the 7.1ch analog audio output module to
the bottom plate.
Step 5: Install the 3 screws (A03) to secure the 7.1ch analog audio output module to the back
panel.
Step 6: Plug in the 3 cables that connect the 7.1ch analog audio output module to the main board
and the power supply board. When connecting the ribbon cable, make sure that the end is aligned
properly with the socket, and insert straightly into the socket.
I N S T A L L A T I O N
6
Advertisement
Table of Contents
