Table of Contents
Advertisement
S E T U P
M E N U
O P T I O N S
Use Previous – Uses the previous wireless settings. A summary of the previous wireless
settings will display, showing information such as the SSID (network name), Security Mode
and Password.
After verifying the previous settings, the player will test the connection and display the results.
Start New – Creates a new wireless configuration. The BDT-101CI supports three wireless
configuration methods:
Scan – Scans for an available wireless network. The player automatically scans for any
available wireless networks and displays the search results in a window. You can press
the UP/DOWN ARROW buttons to highlight a network and then press the ENTER
button to select it. If this network is secured, you will need to input the password using
the remote control. The player will then test the connection and display the results.
Manual – Allows you to manually enter the information for a wireless network. You need
to use the remote control to input the SSID, select the Security Mode and input the
Password. The player will then test the connection and display the results.
WPS – Starts the Wi-Fi Protected Setup. The BDT-101CI supports the WPS standard to
provide an easy and secure establishment of a wireless home network. You may
choose from the following setup options:
PIN – Configures the WPS using a Personal Identification Number. The BDT-101CI
will generate a PIN code and you will need to input it into the software control panel
of your wireless router or access point. Please follow the on-screen instructions.
PBC – Configures the WPS using Push Button Control. You need to push a PBC
button on your wireless router or access point to initiate the wireless connection.
Please follow the on-screen instructions.
58
Advertisement
Table of Contents
