Advertisement
THERMOSTAT
Thermostat
When you turn this control to
the desired setting, the thermostat
will automatically control the
temperature of the indoor air.
The higher the number selected,
the cooler the indoor air will be,
SELECTOR
FAN
HIGH
HIGH
HEAT
COOL
selectorswitch
OFF turns air conditioner off.
FAN ONLY permits medium fan
speed operation without cooling.
For FAN ONLY operation,the FAN
switchmustbein tie CONT~UOUS
position (see below).
LOW COOL permits cooling with
Iowfan speed operation.
mD
COOL permits cooling with
medium fan speed operation.
HIGH COOL permits cooling
with high fan speed operation.
LOW mAT permits heating with
low fan speed operation.
mD
HEAT
permits heating with
medium fan speed operation.
HIGH
HEAT
permits heating with
high fan speed operation.
When this control is set at CLOSE,
only the air inside the room can be
circulated and conditioned. When
it'sin the OPEN position, some
indoor air can be exhausted from
the room.
o
~F~~~ ~ y~]~
The FAN switch, located behind
the front grille, is set at
cQNTINUOUS at the factory to
provide continuous fan operation in
COO1 Or
hca.t
mOdCS.
If you want the fan to cycle on and
off with the compressor or
resistance heater, set the FAN
switch at ~CLE.
Advertisement
