Selector Switch; Thermostat Control; Timer Control - GE AMD10 Use And Care & Installation Manual

Hide thumbs Also See for AMD10:
Table of Contents

Advertisement

Operating Your Air Conditioner Controls
SELECTOR
LOW COOL
\\\\ ''.' '/////,,,,.+cooL
FAN
\\\
ONLY
\\
OFF ,

Selector Switch

OFF turns air conditioner off.
FAN ONLY permits fan speed
operation without cooling.
Energy Saver Switch must be
in NORMAL position.
LOW COOL permits cooling with
low fan speed operation.
MED COOL permits cooling with
medium fan speed operation.
HIGH COOL permits cooling
with high fan speed operation.
Freezing up
Outside air
temperature
dropping
4
THERMOSTAT
COOLER ~
MED
'
=
2 3 4 5 6 7 8 9 10
1
COOL

Thermostat Control

When you move the Thermostat
Control to the desired setting, the
thermostat will automatically control
the temperature of the indoor air.
The higher the number selected, the
cooler the indoor air will become.
If you notice that your air
conditioner is not cooling as it
should, it may be that ice has formed
on the cooling coils. The ice blocks
air flow and stops the unit from
cooling the room. This "freezing up"
is a temporary condition that most
often occurs at night when the
Thermostat is set at a higher number
and the Selector is set on LO COOL.
To correct the condition, set the
Selector at HI FAN or HI COOL
and move the Thermostat to the
warmest setting.
-
MANUAL
HOUR

Timer Control

When you turn the Timer Control
to the MANUAL setting, the air
conditioner starts immediately and
operates continuously if the
Selector Switch is at any setting
other than OFF.
When used with the Delay
Control turns the air conditioner on
or off at preset times.
To delay the start of the air
conditioner anywhere from 1 to
12 hours.
1. Set the Timer
Control for the
number of hours you
want to delay the-start
of the air co~ditioning
operation.
2. Set the Delay
DELAY START.
3. Turn the Selector
Switch to the desired
setting.
To stop the air conditioning from
1 to 12 hours later:
1. Set the Timer Control for the
number of hours you want the air
conditioner to operate before
shutting off automatically.
2. Set the Delay SttiStop Switch at
DELAY STOP.
3. Turn the Selector Switch to the
desired setting.
TIMER
MODE
I
DELAY
START

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amd12Amh12

Table of Contents