5.8.2.14 Alarm Centre
The alarm center interface is shown as below. See Figure 5-39.
This interface is reserved for you to develop. System can upload alarm signal to the alarm center when
local alarm occurs.
Before you use alarm center, please set server IP, port and etc. When an alarm occurs, system can send
out data as the protocol defined, so the client-end can get the data.
5.8.3 Event
5.8.3.1 Detect
5.8.3.1.1
Motion Detect
After analysis video, system can generate a video loss alarm when the detected moving signal reached
the sensitivity you set here.
The motion detect interface is shown as in Figure 5-40.
Figure 5-38
Figure 5-39
153