Exmark Metro HP Operator's Manual page 18

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
3.11 Install and adjust wheel drive linkages.
a) Screw threaded end of drive linkages into swivels in
b) Insert clevis pin from bolt bag through drive linkage,
c) Adjust drive linkage length by threading into or out of
THIS CLEARANCE SHOULD BE EQUAL
wheel drive idler arms.
lever and slot in the neutral lock/park brake latches
(See Figure 9). Make proper adjustments before adding
hairpins.
Clevis Pin
Drive Linkage
LEVER AND ROD ADJUSTMENT
swivel until there is a 3/16" to 1/4" clearance between the
linkage assembly and the bottom of the slot in the neutral
lock/park brake latch. (See Figure 10)
Neutral Lock/ Park
Brake Latch
Drive Linkage
NEUTRAL LOCK LEVER CLEARANCE
Note: Neutral lock/park brake latch clearance should be
checked when there is a slight upward force placed
on the drive levers to remove any "slack" in the
linkage.
www.mymowerparts.com
FIG. 8
Neutral Lock/Park Brake Latch
Drive Lever
FIG. 9
3/16" TO 1/4"
FIG. 10
- 13 -
the
1/4" Clearance