Specifications; Model Number; Engine; Fuel System - Exmark Metro HP Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
PART NO. 413206
LOCATION: Top of Cutter Deck, Under

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial No.s 150,000 – 189,999
MHP4816BV; MHP5216BV;

2.2 ENGINE

2.2.1
2.2.2

2.3 FUEL SYSTEM

2.3.1
2.3.2
2.3.3
2.3.4

2.4: SAFETY INTERLOCK SYSTEM

2.5 STEERING/BRAKE CONTROL:

2.6 TRANSMISSION:

2.6.1
2.6.2
Center Belt Shield (36")
Engine Specifications:
See your Engine Owner's Manual.
3600 RPM (No Load).
Capacity: 5.0 gal.(18.9 L.)
Type of Fuel: Regular unleaded gasoline,
87 octane or higher. In countries using the research
method, it should be a 90 octane minimum.
Fuel Filter: Replaceable in-line
Fuel Shut-Off Valve:
Operator must have transmission in neutral and blade clutch
disengaged to start engine. Release of OPC levers will cause
the engine to stop if transmission is not in neutral
and/or blade clutch is engaged.
Fingertip drive control levers provide independent speed
control, braking and neutral to each drive wheel for moving,
stopping and power turning.
locking drive control levers in the "brake" position.
Peerless 700-061, five speeds forward and one reverse.
Speed Range:
st
2.0 mph (3.22 km/h)
1
nd
2 2.7 mph (4.35 km/h)
rd
3 3.5 mph (5.63 km/h)
www.mymowerparts.com
PART NO. 413327
LOCATION: Top of Cutter Deck, Under
Belt Shield (48" & 52" Decks)
Serial No.s 150,000 & Higher
MHP3614KA; MHP3615KC;
MHP4814KA; MHP4815KC;
MHP4817KA; MHP5217KA.
1/4 turn
Parking brakes are engaged by
th
4 4.1 mph (6.60 km/h)
th
5 6.2 mph (9.98 km/h)
Rev. 3.1 mph (4.99 km/h)
- 7 -