3) Turn the coupling (front) [1] so that the screw is at
the front; then, loosen the screw, and shift the
coupling (front) to the right.
F-4-88
4) Shift the transport belt release unit [1] toward the
rear so that the transport belt is not engaged.
F-4-89
[1]
[2]
[1]
5) Release the roll guide [1], and detach the transport
roll [2] from the shaft together with the belt.
[1]
F-4-90
6) Detach the transport belt (rear) [1] by moving it
through the coupling.
[1]
F-4-91
7) If the transport belt at the front must be detached,
perform steps 8) and 9) at the front. (page 5-
16)Reference[Adjusting the Transport Belt
Position]
Chapter 4
[2]
4-23