3.7.2 Jam Detection in the Stitcher Assembly
The machine is equipped with the following sensors to check the presence/absence of paper and to see if paper
is moving properly:
- saddle inlet sensor
- saddle small sensor
- saddle vertical path sensor
- saddle lead edge path sensor
- saddle pre-pressing sensor
- saddle stitcher sensor
The presence/absence of a jam is checked by the finisher controller PCB at such times as programmed in
advance. When the finisher controller PCB detects a jam, it suspends the ongoing transport/delivery operation
and communicates the presence of a jam to the host machine.
SU
F-3-47
Chapter 3
0015-2099
PS101
PS103
PS111
PS110
PS105
3-49