Table of Contents
Advertisement
Turn on/off message edit
You can edit the turn on/off message and store it in memory.
Following four messages (factory set) can be edit with 8 char-
acters each.
Turn-on message
• MESSAGE1 : HELLO
• MESSAGE2 : WELCOME
Turn-off message
• MESSAGE3 : SEE YOU
• MESSAGE4 : GOOD-BYE
1.
Press the
to display the " MESSAGE " on the
DISP
display window.
2.
Rotate the dial within 3 seconds to select the desired
message you want to edit.
MESSAGE1
MESSAGE2
MESSAGE3
SAGE4
3.
Press the
MUTE / SENS
, then enter the character.
A. Rotate the dial in a clockwise direction to select the
desired characters.
<
>
( A
B
C
. . . Z
0 1 2 3...9 " "Space )
B. Press the
TUN/TRK
to move the flashing cursor to
the next position. If you press
ing cursor moves to the left.
C. Repeat steps A. and B. to complete entering the en-
tire message 8 characters max.
Tip
To erase/correct a message, press the
than 2 seconds to clear the character and re-enter.
4.
Press the
to store the message.
MUTE / SENS
The new message flashes.
5.
To return to the normal radio reception, Press
Erasing the turn on/off message
You can erase the turn on/off message if so desired.
1.
Press the
dial to select the message you want to erase.
2.
Press the
The massage flashing.
3.
Press the
Repeat steps 1. and 3. if you want to erase other mes-
sage.
4.
To return to the normal radio reception, Press
Demonstration mode
The unit shows the demonstration of each function.
MES-
When a demonstration is finished, it begins again after 30
seconds, and this is repeated.
1.
Press the
2.
Press the
∗
+
−
'
/
seconds to activate the demonstration mode.
'
Press both button again for more than 2 seconds to
cancel this mode.
, the flash-
TUN/TRK
for more
DISP
.
DISP
to display the MESSAGE, then rotate the
DISP
.
MUTE / SENS
for more than 2 seconds.
DISP
DISP
to turn off the unit.
PWR
and
simultaneously for more than 2
DISP
1
.
E-7
Advertisement
Table of Contents
