Adjusting The Sound Characteristics - Blaupunkt KEY LARGO DM2000 Manual

High-power fm/am/cd receiver with detachable face
Hide thumbs Also See for KEY LARGO DM2000:
Table of Contents

Advertisement

Mode Selector
Each time the
is pressed, the display window will change
DISP
over as shown below;
Priority
Temporary
STN CALL
LEVEL 1
(NO NAME)
CLK ADJ
CLOCK 12
Display priority setting
Display Priority can be set for the following items;
Radio mode
• Frequency and Station Name, plus during
CDC(CD changer) mode
• Track No, Track time and Disc name.
Example
To set Station Name to the Display Priority.
1.
Press the
DISP
three times, and the temporary display
appears in the display window.
2.
Hold the
pressed for more than 2 seconds.
DISP
" NO NAME" or any station name blinks once to indicate
that Station Name is selected for the Display Priority.
After 5 seconds, the display mode will automatically re-
turn to the Display Priority showing either "NO NAME" or
the station name.
Tip
Frequency Display is initially set to the Display Priority,
and Station Name ("NO NAME") is set to the Temporary.
E-4

Adjusting the Sound Characteristics

1.
Press the
as follows;
BASS 0
METER 1
R0 F0 (FADER)
MESSAGE
2.
Rotate the dial to adjust the selected item.
Adjust within 3 seconds after selecting the item. After 3
seconds, the dial functions as volume control. Use the
following tables as a guide for adjusting the settings in
each mode.
BASS
TREBLE
LOUDNESS
BALANCE
FADER
to select the desired adjustment mode
AUD
TREBLE 0
LOUD OFF (LOUDNESS)
L0 R0 (BALANCE)
Adjustment Range
BASS -5
BASS +5
TREBLE -5
TREBLE +5
LOUD OFF
LOUD ON
L9 R0(Full left)
L0 R9(Full right)
R9 F0(Full rear)
R0 F9(Full front)
Switching the Source (Selecting auxiliary
input)
You can connect the auxiliary equipment (Portable cassette
player, etc) to this radio via optional AUX-IN cable. (See page
10)
Each time the
is pressed, the operation source will
SRC
change over as shown below;
CD
CD changer or AUX
Press the
to return to tuner mode.
BND / TS
Note
You can not use the
SRC
in the following cases.
• When a CD is not inserted in the unit, and CD changer or
auxiliary equipment are not connected to this unit.

Advertisement

Table of Contents
loading

Table of Contents