Setting The Equalizer; Turn On/Off Message Edit - Blaupunkt MONTREAL CD34 Manual

Setting the equalizer

You can select an equalizer curve for 3 music types (Rock,
Pop, Classic).
You can store and adjust the equalizer settings for frequency
and level.
Selecting the equalizer curve
1.
Each time you press the to select the desired equal-
EQ
izer curve as follows.
ROCK
POP
CLASSIC
USER 1
USER 2
EQ OFF
Adjusting the equalizer curve
1.
Press the to select the USER 1 or USER 2.
EQ
2.
Press and hold the for more than 2 seconds to
EQ
enter the BAS/TRE adjustment mode.
3.
Use the following buttons and dial to set the desired sound
characteristics.
or : To switch BAS/TRE
VOL
or : Adjust the characteristics
Tips
• When you set the USER1 or 2, the following indication on
the display remains lit.

Turn on/off message edit

You can edit the turn on/off message and store it in memory.
Following four messages can be edit with 9 characters each.
Turn-on message
• HELLO (MESG 1) / WELCOME (MESG 2)
Turn-off message
• SEE YOU (MESG 3) / GOOD-BYE (MESG 4)
1.
Press the MENU , then press the
play the "MESG ON" on the display window.
2.
Press the or to flash the "HELLO".
SRC PWR
3.
Rotate the VOL dial to select the desired message you
want to edit.
HELLO ➜ WELCOME ➜ SEE YOU ➜ GOOD- BYE
4.
Press the SRC or PWR , then enter the character.
A. Rotate the VOL dial in a clockwise direction to select
the desired characters.
< >
( A ➜ B ➜ C ➜ . . . Z ➜ ➜ ➜
➜0➜1➜2➜3...9➜" "Space )
B. Press the or to move the flashing cur-
sor.
C. Repeat steps A. and B. to complete entering the en-
tire message 9 characters max.
5.
Press the or PWR to store the message.
SRC
The new message flashes and automatically returns to
previous indication.
Tips
• To erase /correct a message, press the
2 seconds to clear the character and re-enter.
• If you make no button input or dial operation in 30 seconds,
the message edit mode will turn off automatically.
• Make sure the "MESG" will be "ON" .
• When entering a name, pressing the following buttons af-
fects the display of characters as follows.
: Changes to inputting letters. (Starts with " A ".)
: Changes to inputting numbers. (Starts with "
: Changes to inputting characters. (Starts with "
: Enters a space (blank).
Erasing the turn on/off message
You can erase the turn on/off message if so desired.
1.
Press the
play the "MESG ON" on the display window.
2.
Press the
lect the desired message you want to erase.
3.
Press the
or to dis-
than 2 seconds.
4.
To return to the previous indication, Press
Repeat steps 2. and 3. if you want to erase other mes-
sage.
∗ + − . /
➜ ➜ ➜ ➜ ➜
'
for more than
MENU
0
".)
<
".)
, then press the or to dis-
MENU
or , then rotate the VOL dial to se-
SRC PWR
SRC or , then press the for more
PWR MENU
.
MENU
E-5