Table of Contents
Advertisement
Storing the station names
You can assign a name to each radio station and store it in
memory. As much as 30 station names can be stored com-
posed with 8 characters each.
Storing the station names
1.
Tune in a station whose name you want to store.
2.
Press the
DISP
for more than 2 seconds.
The " NAME EDT " will light then the " _ _ _ _ _ _ _ _ " on
the display window. The first " _ " flashes.
3.
Enter the characters.
A. Rotate the dial in a clockwise direction to select the
desired characters.
<
>
( A
B
C
. . . Z
0 1 2 3...9 " "Space )
B. Press the
to move the flashing cursor to
TUN/ TRK
the next position. If you press
ing cursor moves to the left.
C. Repeat steps A. and B. to complete entering the en-
tire name 8 characters max.
Tip
To erase/correct a name, press the
2 seconds to clear the character and re-enter.
4.
Press the
to store the station name.
MUTE / SENS
The station name flashes.
5.
To return to the normal radio reception, Press
Erasing the station names
1.
Tune in any station and press the
seconds.
2.
Press the
.
MUTE / SENS
The station name or " _ _ _ _ _ _ _ _ " flashing.
3.
Rotate the dial to select the name of the station that you
want to erase. To erase all the name of the stations, dis-
play " ALL DEL ".
4.
Press the
for more than 2 seconds.
DISP
Repeat steps 3. and 4. if you want to erase other names.
5.
To return to the normal radio reception, Press
E-6
Direct Access to Memorized Stations via
Station call
You can search for the memorized AM & FM station names in
the memory.
1.
Press the
play window.
2.
Rotate the large dial to select the desired station name.
3.
Press the
Level Meter selection
∗
+
−
'
/
The meter displays can be selected from four types.
'
You can select :
• METER 1 : Type that the level meter goes upward.
, the flash-
TUN/ TRK
• METER 2 : Type that only the very top segment lights.
• METER 3 : Type that the remaining segments light. (op-
• METER 4 : Type that the level meter goes up and down
for more than
DISP
• METER 0 : No meter is indicated.
1.
Press the
window.
2.
Rotate the dial in a clockwise directiopn to select the
DISP
.
desired meter indication.
METER 1
TER 0
for more than 2
DISP
L-ch Level meter
.
DISP
to display the " STN CALL " on the dis-
DISP
to tune in the desired station.
MUTE / SENS
posite of METER 2)
dividing from the center segment.
to display the " METER 1 " on the display
DISP
METER 2
METER 3
METER 4
R-ch Level meter
Level Meter Sensitivity selection
The sensitivity of the level meter display can be switched.
You can select :
• LEVEL 1 : Normal sensitivity.
• LEVEL 2 : High sensitivity.
1.
Press the
to display the " LEVEL 1 " on the display
DISP
window.
2.
Rotate the dial to select the desired meter sensitivity.
LEVEL 1
LEVEL 2
Enhancing the bass sound
For extended bass centered @ 72Hz, the XBASS function
can be set for either each band and CD mode.
You can select :
• XBASS 1 : Enhanced BASS level (low).
• XBASS 2 : Enhanced BASS level (Middle).
• XBASS 3 : Enhanced BASS level (High).
• XBASS 4 : Enhanced BASS level (Very high).
• XBASS 0 : No BASS enhanced.
Press the
repeatedly to select the bass sound.
XBASS
"
" appears on the display window.
ME-
Each time you press
, the current mode appears on
XBASS
the display window and the mode change as follows:
XBASS 0
XBASS 1
XBASS 2
XBASS 3
XBASS 4
Advertisement
Table of Contents
