Onkyo TX-8130 Instruction Manual page 34

10. Press the ENTER button with "Update" selected to
start update.
"Completed!" is displayed when the update is
complete.
11. Disconnect the USB storage from the unit.
12. Press the Í ON/STANDBY button on the front panel
to put the unit into standby.
0 Do not use the Í button on the remote control for
this operation.
The update is complete. The unit's firmware has been
updated to the latest version.
When an error message appears
When an error occurs, "*-** Error!" appears on the display
of this unit. (Characters and numbers appear in place of
the asterisks.) Refer to the descriptions below to check
the meaning.
Error code
*-01, *-10: USB storage device not found. Check
whether the USB storage device or USB cable is
correctly inserted to the USB port of the unit.
Connect the USB storage device to an external power
source if it has its own power supply.
*-05, *-13, *-20, *-21: The firmware file is not present in
the root folder of the USB storage device, or the
firmware file is for another model. Retry from the
download of the firmware file.
Others: Disconnect and reconnect the power cord,
and retry updating.
34
Various settings