System Memory; Expansion Slots; Configuring An Expansion Card - Asus A7V8X-X User Manual

1.9

System memory

The motherboard has three Double Data Rate (DDR) DIMM sockets that supports
up to 3GB unbuffered non-ECC PC3200/2700/2100/1600 DDR DIMMs.
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it has a
184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a DDR DIMM is
single notched while an SDR DIMM is double notched.
A7V8X-X
®
A7V8X-X 184-Pin DDR DIMM Sockets
A DDR or SDR DIMM is keyed with a notch so that it fits in only one
direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.
PC3200 maximum to 2 banks only and PC2700 maximum to 4 banks only.

1.10 Expansion slots

The A7V8X-X motherboard has six (6) expansion PCI slots and one (1) AGP 8X
slot. The following sub-sections describe the slots and the expansion cards that
they support.

1.10.1 Configuring an expansion card

After physically installing the expansion card, configure the card by adjusting the
software settings.
1. Turn on the system and change the necessary BIOS settings, if any.
2. Assign an IRQ to the card. Refer to the tables below.
3. Install the software drivers for the expansion card.
ASUS A7V8X-X Motherboard
104 Pins
80 Pins
1-11