Table of Contents
Advertisement
into the manual control; if changing back into the automatic control, the user should set the option on the
menu of the infrared at OFF.
2.4.4
WIPER：WIPER open/close. ( Set Preset 51 to turn ON / Call Preset 51 to turn OFF)
2.4.5
WIPER MODE：continuous or moment mode to be selected.
2.4.6
DEFOGGER：DEFOGGER open/close. (Set Preset 52 to Turn ON / Call Preset 52 to turn OFF)
2.4.7
RETURN： To return to the main menu.
2.5
CAMERA MASK SET
2.5.1
MASK PRIVACY: ON/OFF
2.5.2
MASK SHADE: BLACK/GRAY/WHITE
2.5.3
MASK REGION: 6 or 2 privacy zone masking.(only for part of
camera)
2.5.4
RETURN: return to Main Menu.
2.6 PROGRAM
2.6.1
AUTO PAN START POS： to set the start position of the pan between
two positions. After entering you can move the dome camera by the
joystick. Push CLOSE button you can store current position and
return.
2.6.2
AUTO PAN END POS： to set the end position of the patrol between
two positions. After entering you can move the pan/tilt by the joystick.
Push CLOSE button you can store current position and return.
2.6.3
RUN AUTO PAN： to pan between two positions. Please set the start
position and the end position of the pan first. If the start position is
just the end position, the dome camera shall make 360° pan. The
speed of the pan is divided into six grades: FAST / NORMAL /
SLOW / -FAST / -NORMAL / -SLOW. The first three grades are the pan less than 180° while the rear
three grades are the pan larger than 180°. Adjust speed by PAN LEFT/PAN RIGHT and press OPEN
button to exit the menu. The start position and the end position of the pan can be set up by options 1 and 2
of the menu.
2.6.4
SET TITLE： to edit the title of the preset position. Only first 63 positions can have their titles. Select
the number of the preset positions by PAN LEFT/PAN RIGHT and press OPEN button to enter into the
edit state. Operations under the edit state are shown below.
2.6.5
SET PATROL： to edit patrol data of multiple positions. Select the number of the pattern by PAN
LEFT/PAN RIGHT and press OPEN button to enter into the edit state. Operations under the edit state are
shown below.
2.6.6
RUN PATROL： To run patrol of multiple positions. Select the number of the pattern by PAN LEFT/PAN
RIGHT and press OPEN button to exit the menu.
2.6.7
RECORD PATTERN： To edit self-study of patrol. It can remember PTZ operation in 40 seconds in
maximum. When the 40th second is up or press CLOSE button, the edit is terminated.
2.6.8
RUN PATTERN： To run self-study pattern. After running it shall exit the menu. Control the joystick to
terminate its running.
2.6.9
RETURN： To return to the main menu.
3.
Appendix to the Menu
Operation of Multiple Patrol Positions under Edit State. After entering into Edit state, operations on the
５
Advertisement
Table of Contents
