Subaru LEGACY Service Manual page 33

7) Apply a coat of specified grease to guide pin,
outer surface, sleeve outer surface, cylinder inner
surface, and boot grooves.
Grease:
NIGLUBE RX-2 (Part No. 003606000)
( 1 )
(1) Pin boot
(2) Lock pin or guide pin
(3) Apply grease.
8) Install guide pin boot on caliper body.
9) Install lock pin boot on caliper body and insert
lock pin sleeve into place.
E: INSPECTION
1) Repair or replace faulty parts.
2) Check caliper body and piston for uneven wear,
damage or rust.
3) Check rubber parts for damage or deterioration.
REAR DISC BRAKE ASSEMBLY
( 3 )
:
( 2 )
BR-00030
BR-31
BRAKE