Fog Horn; Intercom - Ray60 And Ray70 - Raymarine RAY50 Installation And Operation Instructions Manual

Table of Contents

Advertisement

9.3 Fog horn

The fog horn function requires an optional loud hailer
to be connected.
The fog horn function can be set to manual or to a
predefined automatic mode
The predefined automatic modes consist of a
sequence of tones which are then repeated.
Fog mode
Description
Vessel underway
Underway
Under-
Vessel not underway
way/Stopped
Sailing/Fish-
sailing vessel or any
ing
vessel fishing but not
trolling
Restrict/Tow
Restricted in ability to
maneuver or towing
another vessel
Under tow
This vessel is being
towed
Pilot vessel
This vessel is a pilot
vessel
At anchor
Vessel is at anchor
Vessel is aground
Aground
In manual mode a continuous tone is sounded for as
long as the PTT button is pressed.
Note: VHF calls can only be made between fog
horn patterns.
Using the fog horn in manual mode
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int.
1. Select Fog horn.
2. Select Manual mode.
3. Press and hold the PTT button to sound a
continuous fog horn tone.
4. Press the Back button to exit Fog horn mode.
Using automatic fog horn modes
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int.
1. Select Fog horn.
2. Select Automatic mode.
3. Select an automatic pattern.
The selected pattern will play and repeat until
interrupted.
4. Select Stop fog horn to exit the automatic fog
horn mode, or
5. Select Change pattern to select a different fog
horn pattern.
Hailer, Fog horn, and Intercom
9.4 Intercom — Ray60 and Ray70
The Intercom function is available when a second
station is connected to your radio.
The intercom function allows voice communication
between the second (handset) station and the
primary station. A call can be initiated from either
station.
Pattern
Using the intercom
1 long tone
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int.
1. Select Intercom.
2 long tones
The other station will ring.
2. Wait for the handset station to acknowledge the
1 long tone and 2
call.
short tones
3. Press and hold the PTT button and speak your
message.
1 long tone and 2
short tones
Responding to the intercom
1. Press the PTT button and acknowledge the call
1 long tone and 3
and to respond to subsequent voice messages.
short tones
4 short tones
12 consecutive
rings
3 short rings, 12
consecutive rings,
3 short rings
77

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ray60Ray70

Table of Contents