Seatalk Ng® Connection - Raymarine RAY50 Installation And Operation Instructions Manual

4.7 SeaTalk ng® connection
The product can interface with Raymarine
or GNSS receivers and Raymarine
displays using the SeaTalk
3
ng
SeaTalk
1. Ray50 / Ray60 / Ray70
2. Optional Raymic handset station (Ray70 and
Ray70 only)
3. Optional 3 rd party passive speaker
4. Loud hailer (Ray70 only)
5. GPS Receiver
6. Raymarine ® Multifunction display (MFD)
A Raymarine ® SeaTalk
cannot be connected directly to the product, as GPS
and GNSS receivers are powered via the SeaTalk
backbone.
Connecting SeaTalk
Before connecting to SeaTalk
SeaTalk ng® Reference Manual, to ensure that the
maximum permitted Load Equivalence Number
(LEN), for the SeaTalk
once this product is connected.
Cables and connections
® GPS
® multifunction
ng® connection.
1
5
6
ng® GPS or GNSS receiver
ng®
ng® , refer to the
ng® backbone is not exceeded
2
4
1. Rotate the SeaTalk
anti clockwise, to the unlocked position.
2. Ensure the spur cable connector is correctly
orientated.
D13293-1
3. Fully insert the spur cable connector into the
SeaTalk ng®
4. Rotate the locking collar clockwise 2 clicks, to
the locked position.
ng®
ng® connector's locking collar
connector on the unit.
D13218-1
33