(Cisco Rv180W); Configuring The Wireless Network; A Note About Wireless Security - Cisco RV180 Administrator's Manual

Configuring the Wireless Network

(Cisco RV180W)

NOTE

A Note About Wireless Security

Cisco RV180/RV180W Administration Guide
This chapter describes how to configure your wireless network and includes the
following sections:
• A Note About Wireless Security, page 60
• Understanding the Cisco RV180W's Wireless Networks, page 63
• Configuring Basic Wireless Settings, page 63
• Configuring Advanced Wireless Settings, page 70
• Configuring Rogue Access Point Detection, page 71
• Configuring Wi-Fi Protected Setup, page 72
• Configuring a Wireless Distribution System (WDS), page 73
• Configuring Load Balancing, page 74
This chapter only applies to the Cisco RV180W model.
Wireless networks are convenient and easy to install, so small businesses with
high-speed Internet access are adopting them at a rapid pace. Because wireless
networking operates by sending information over radio waves, it can be more
vulnerable to intruders than a traditional wired network. Like signals from your
cellular or cordless phones, signals from your wireless network can also be
intercepted. The following information will help you to improve your security:
• Wireless Security Tips, page 61
• General Network Security Guidelines, page 62
3
60