Rebooting The Cisco Rv180/Rv180W; Restoring The Factory Defaults - Cisco RV180 Administrator's Manual

Administering Your Cisco RV180/RV180W

Rebooting the Cisco RV180/RV180W

Rebooting the Cisco RV180/RV180W

Restoring the Factory Defaults

!
CAUTION
!
CAUTION
Cisco RV180/RV180W Administration Guide
firmware. Choose Status > System Summary to make sure the router installed the
new firmware version.
To reboot the router, choose Administration > Reboot Router. Click Reboot.
During a restore operation, do not try to go online, turn off the router, shut down the
PC, or do anything else to the router until the operation is complete. This should
take about a minute. When the test light turns off, wait a few more seconds before
doing anything with the router.
To restore factory defaults to the router, choose Administration > Restore Factory
Defaults. Click Default.
Do not perform this procedure unless you want to erase all configuration you have
performed on the router.
7
153