Preparation; Antenna Connection; Connecting External Devices - Sharp LC-40LE660X Operating Instructions Manual

Preparation

Antenna connection

Connect antenna cable to the antenna terminal
If your outdoor antenna uses a 75-ohm coaxial cable
with a standard DIN45325 plug (IEC 169-2), plug it into
the antenna jack at the rear of the set.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.

Connecting external devices

You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
INPUT on the remote control unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 6 or INPUT 7 terminals.
When using component cable (commercially
available)
VCR/Game
INPUT 6 6
console/
COMPONENT/AV INPUT
R - AUDIO - L VIDEO/Y P (C
B
Camcorder
LC-406070LE660X_EN_GXX.indd 3 LC-406070LE660X_EN_GXX.indd 3
or
If your outdoor antenna uses a 300-ohm twin-lead fl at
feeder, connect a 300-ohm to 75-ohm impedance
converter and plug it into the antenna jack at the rear of
the set.
When using composite cable (commercially
available)
INPUT 6 6
C.I.
USB 1
DC5V 1.5A
MHL HDMI 2
2
(DC5V 900mA)
OUTPUT
) P (C ) AUDIO(L/R)
R R HDMI 3 or
B 3
R - AUDIO - L VIDEO
INPUT 7 7
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI/ARC)/INPUT 2 (HDMI/MHL)/INPUT 3 (HDMI)/INPUT 4 (HDMI)/INPUT 5 (HDMI)
or INPUT 6 terminals when connecting to a DVD player/Digital TV STB (Set Top Box) and other audiovisual
equipment.
When using HDMI-certifi ed cable (commercially
available)
DVD player/
Digital TV STB
(Set Top Box)
Connecting a PC
You can use the INPUT 8 PC terminals when
connecting to a PC of ANALOGUE RGB terminal.
ANALOGUE RGB
ANALOGUE
PC
ANALOGUE
RGB (PC)
PC
Connecting a USB device
Connect a USB device to the TV.
CAUTION
• Do not disconnect a USB device from the TV while transferring fi les, when a screen is in "USB" mode.
VCR/Game
NOTE
console/
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are
Camcorder
viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.
• The illustrations used throughout this manual are based on LC-60LE660X.
When using component cable (commercially
available)
C.I.
USB 1
DC5V 1.5A
MHL HDMI 2 2 6
(DC5V 900mA)
OUTPUT
5 AUDIO(L/R)
HDMI 5 HDMI 3 3
You can use the INPUT 5 (HDMI) terminal when
connecting to a PC of DIGITAL DVI terminal.
5
8
AUDIO IN
C.I.
5
USB 1
1 DC5V 1.5A
HDMI 1 MHL HDMI 2 2
8 (DC5V 900mA)
OUTPUT
AUDIO(L/R)
HDMI 3
3
ARC
AUDIO IN
5
HDMI 5
RS-232C IOIOI
Using Digital Audio Output
It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal. PCM audio outputs from
the terminal.
Optical fi bre cable
C.I.
USB 1
DC5V 1.5A
MHL HDMI 2 2
(DC5V 900mA)
OUTPUT (commercially available)
AUDIO(L/R) HDMI 3
3
DIGITAL
AUDIO
OUTPUT
To optical digital input of
external audio devices
DVD player/
Digital TV STB
(Set Top Box)
DIGITAL DVI
PC
- 3
9/2/2014 9:23:32 AM 9/2/2014 9:23:32 AM