Preparation; Using The Remote Control; Batteries For The Remote Control - Sharp AQUOS LC-22SV2U Operation Manual

Liquid crystal television
Hide thumbs Also See for AQUOS LC-22SV2U:
Table of Contents

Advertisement

PREPARATION
• Use the remote control by pointing it towards the remote control
sensor window on the main unit. Objects between the remote
control and sensor window may prevent proper operation.
Cautions
regarding
use of the remote
control
• Do not expose the remote control to shock.
In addition, do not expose the remote controt to tiquid, and do not place
in an area with high humidity.
• Do not instatt or place the remote control under direct sunlight. The heat
may cause deformation
of the unit.
• The remote control may not work properly if the remote controt sensor
window of the main unit is under direct sunlight or strong lighting. In
such case, change the angle of the lighting or LCD TV set, or operate
the remote control closer to the remote control sensor window.
Before using the LCD TV set for the first time, install two ("AAA" size, UM/SUM-4)
batteries (supplied).
When the batteries become depleted and the remote control fails to operate, replace the batteries with
new ("AAA" size, UM/SUM-4)
batteries.
1
Open the battery
2
Insert two ("AAA" size, UM/
3
Close the battery
cover.
SUM-4) batteries,
cover.
• Slide the cover while
pressing the (T) part.
• Position the positive and
negative ends of the batteries
as indicated in the compart-
ment.
• Engage the claw on the
cover into the battery
housing and slide shut.
J
Cautions regarding batteries
Improper use of batteries can result in chemical leakage and/or explosion.
Be sure to follow the instruc-
tions below.
• Place batteries with their terminals corresponding
to the (+) and (-) as indicated in the compartment.
• Different types of batteries have different characteristics.
Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
battery and/or cause the old battery to leak chemicals.
• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
• The batteries supplied with the product may have a shorter life expectancy
due to storage conditions.
• If the remote control will not be used for an extended period of time, remove the batteries from the
remote control.
m

Advertisement

Table of Contents
loading

Table of Contents