Table of Contents
Advertisement
Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all
around the set. To prevent any fault and unsafe situations,
please do not place any objects on top of the set.
“Use this apparatus in tropical and moderate climates.”
Features
• Remote Control Colour Television
• 100 channel presets (UHF / VHF / Cable)
• Cable Channel Compatible
• Menu Driven functions
• 3 Euro connector Sockets
• Front AV Input Sockets
• Front S-VHS Input connector
• German Stereo (IGR) and Digital Stereo NICAM
• Full function teletext (1000 Page Text) (TOP Text)
• Direct Channel access
• APS (Automatic Programming system) Tuning
• Program custom name feature
• Automatic search tuning
• Sleep Timer
• Child lock
• Blue mute on no video signals
• Audio mute on no video signals
• Auto switch off after 5 mins of no signal
• WSS (wide screen signal decoding)
• NTSC playback in AV Input
• Headphone Terminal
• PIP Sound On Headphone
• Eco PIP: Picture In Picture (1 Tuner)
• Split Screen (Picture and Text)
• CTI : (Colour Transient Improvement) Improvement of
horizontal transitions of chrominance (colour) signals.
• Automatic VCR detection
• Digital Scan (100 Hz - Line Flicker Reduction)
• Graphic Equalizer
• AVL: Automatic Volume Limiting
• Tilt adjustment
• Tint Control
• DNR: Digital Noise reduction
• Still function
Downloaded from:
http://www.usersmanualguide.com/
Before Switching on your TV
Power connection
Important: The TV set is designed to operate on 220-240V
AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the mains.
Aerial Connections
• Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect external equipment
See “Connecting external equipment” on page 19.
• See the instruction manuals provided with the external de-
vices too.
Remote Control Battery Installation
Before using the TV set for the first time, install the supplied
dry batteries in the remote control.
1. With your thumb nail, pull up the slit as indicated by the
arrow to remove the battery cover.
2. Insert two batteries 1.5 V (R03 AAA size). Be sure to
match the battery +/- terminals with the +/- marks inside
the compartment.
3. Replace the battery cover.
Notes:
• Remove batteries if weak or if the unit is not in use for long
periods.
• Do not mix old and new batteries.
• Incorrect installation of the batteries may damage the re-
mote control.
ENGLISH - 7 -
$ÃWÃ666ÃS"
Advertisement
Table of Contents
