Setting The Time Of Day - Hotpoint CH 10750 GF S Operating Instructions Manual

Auto cooking programme
Cook Period Button
Cook Period is the actual length of time for which, the timer will switch the
oven(s) on as part of an "Auto Cooking" programme. (e.g. If you set 2 hours,
the food will be cooked for 2 hours).
End Time Button
The time of day at which you want an "Auto Cooking" programme to end.
For Example: If you set a "Cook Period" for 2 hours, and "End Time" of 11:00.
The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You
will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme
has finished.
Notes:
- When setting an Auto Cooking programme you will need to set the oven
control(s) to the required temperature(s) when you set the timer.
- If an Auto Cooking programme has been set the oven(s) will only operate
during the pre-programmed time.
Manual Button
Needs to be pressed to cancel an Auto Cooking programme and return the
oven(s) to Manual operation.
"+" and "-" Buttons
Used to adjust the various timer function settings.

Setting the time of day

Step 1 Make sure all oven controls are turned
. .
A
0 0 0
Off.
U
T
O Step 2 Check the electricity supply to the
cooker is turned on.
Step 3 When switched on the display will
show 0.00 and the Auto symbol, flashing
intermittently.
.
Step 4 Press & hold in both the Cook Period &
A
0 0 0
U
End Time buttons together.
T
O
Step 5 With the Cook Period & End Time
buttons still held in, press either the "+" or "-"
buttons to set the correct time of day.
Step 6 Release all the buttons simultaneously. THE TIME OF DAY IS
NOW SET.
To change the time of day repeat Steps 4, 5 & 6 above.
Note: You cannot adjust the time of day if the timer has been set for
an Auto Cooking Programme.
Setting the minute minder
Step 1 Ensure the time of day is set correctly.
.
Step 2 Press and hold the Minute Minder button.
0 0 0
Step 3 With the Minute Minder button held in,
set the required Minute Minder period using the
"+" and "-" buttons. A 'bell' symbol will light up.
Release all buttons and the timer display will
revert back to the time of day. The 'bell' symbol
will remain lit to signify that a Minute Minder period has been set.
At the end of the set time an audible tone will be heard, and the 'bell' symbol
will disappear.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
.
A
0 0 0
U
T
O
Step 4 To cancel the audible tone press the
Minute Minder button.
Note 1: When the Minute Minder has been set, the time remaining can
be checked at any time by simply pressing the Minute Minder button.
Note 2: If necessary the Minute Minder can be cancelled before the
tone sounds by pressing and holding the Minute Minder button and
then at the same time pressing the "-" button until 0.00 appears in the
display window.
Auto cooking programmes
There are two Auto Cooking programmes that can be selected using your
timer:-
(a) To set the timer to switch the oven(s) On and Off Automatically
(b) To set timer to switch on immediately and OFF automatically after
a set cook period.
a) To set the timer to switch the oven(s) on and off
automatically
This allows you to cook at a specified time for a chosen period before
the oven switches off Automatically.
Step 1 Check that the correct time of day is set, if not follow instructions for
setting the time of day.
Step 2 Place food onto the correct shelf position in the oven and close the
oven door(s).
.
Step 3 Press and hold in the Cook Period button.
0 0 0
The display will read 0.00 with the 'cookpot'
symbol lit.
Step 4 With the Cook Period button still held
in, set the required Cook Period using the "+"
and "-" buttons.
.
Release the buttons and the timer display will
A
1 4 2 0
U
revert to the time of day with the 'Auto' symbol
T
O
and 'cookpot' symbol lit.
.
Step 5 Press and hold in the End Time button.
A
1 6 2 0
U
T
The display will read the earliest possible end
O
time for the Cook Period that you have set
above. The 'Auto' symbol and 'cookpot' symbol
will be lit.
Step 6 With the End Time button still held in, use
the "+" and "-" buttons to set the 'End Time' (i.e.
The time you require the oven to switch off ).
Release all the buttons and the timer will revert
back to the time of day.
.
The 'Auto' symbol will remain lit to signify that
A
1 4 2 0
U
an Auto Cooking Programme has been set. The
T
O
'cookpot' symbol will go out.
GB
9