Table of Contents
Advertisement
Technical Specifications
Model
Product Dimensions (H x D x W)
Net weight
Gross weight
Flow rate*
Storage tank capacity
Purification technology
7 Stage Purifying Technology
Membrane type
Material of construction for plastic
parts
Pump type
Input voltage
Power rating (Max.)
Pressure Rating***
% Recovery**
TDS reduction**
Input water temperature
Recommended input feed water
quality for the optimum performance
of your product
RECOMMENDED FEED WATER QUALITY
Parameter
Total Dissolved Solids TDS
Total hardness
Turbidity
Feed water pressure
Feed water temperature
Puritee + ™
488 mm x 330 mm x 306 mm
9.3 kgs (approx.)
13.8 kgs (approx.)
Up to 15 litres per hour
9 litres (approx.)
RO (Reverse Osmosis) + Silver Charged
Membrane Technology
Pre-filter + Sediment filter + Pre Carbon
filter + Side Stream RO + MIN-TECH + Silver
Activated Post Carbon and SCMT filter
Thin film composite RO membrane
Food safe, non-toxic, engineering grade
plastics
Diaphragm pump, 24VDC, 0.26 Amps,
Operating Pressure 125 psi (Max.)
150 – 300 VAC, 50 Hz
48 Watts
7 psi to 30 psi
Up to 30%
≥95% (approx.)
5°C to 45°C
*
Limits
Up to 2000 ppm
**
Up to 500 ppm
Up to 5 NTU
7 psi to 30 psi
5°C to 45°C
*** If input pressure exceeds 30 psi, a
22
Flow rate depends on variable factors
such as feed water pressure, feed water
characteristics and condition of the
membranes and filters.
Recovery and TDS reduction
percentages also depend on variable
factors such as life and condition of the
membranes and filters, feed water
pressure, feed water characteristics.
pressure reducing valve needs to be
installed at the feed line. If the pressure
is lower than 7 psi, a booster pump
needs to be installed.
Advertisement
Table of Contents
