Table of Contents
Advertisement
Function of Indicators
Figure 3
Power Button
This button is used to switch ON/OFF the water purifier.
•
When there is a leak in the water purifier, the power button starts to blink with
continuous beep till it is fixed.
•
When the water pressure is lower than required water pressure limits, the power
button starts to blink continuously with the beep sound for 10 seconds till the water
pressure becomes normal.
Note: Call A. O. Smith Customer care centre, if you notice continuous blinking of Power light.
Tank full indicator
This indicates that the water purifier tank is full.
•
When there is an overflow the indicator starts to blink with continuous beep till it is
fixed.
Note: Call A. O. Smith Customer care centre, if you notice continuous blinking of Tank full indicator.
07
Advertisement
Table of Contents
