Related Manuals for Fujitsu B19-6 LED
Summary of Contents for Fujitsu B19-6 LED
- Page 1 Display Operating Manual B19-6 LED / B22W-6 LED Downloaded from ManualMonitor.com Manuals...
- Page 2 Should you have any technical questions, please contact: • Our Hotline/Service Desk (see the Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your authorized distributor • Your sales office We hope you really enjoy using your new Fujitsu system. Downloaded from ManualMonitor.com Manuals...
- Page 3 Downloaded from ManualMonitor.com Manuals...
- Page 4 Use of these by third parties for their own purposes may constitute an infringement of the holders’ rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26361-K1375-Z230-1-7619, edition 1 Downloaded from ManualMonitor.com Manuals...
-
Page 5: Table Of Contents
B19-6 LED / B22W-6 LED Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Explanatory information about standard ISO 9241-307 Technical specification Downloaded from ManualMonitor.com Manuals... - Page 6 All other trademarks used in this document are trademarks or registered trademarks of their respective owners and are recognised as being protected. Copyright © Fujitsu Technology Solutions GmbH 2010 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, either in part or in whole.
- Page 7 DisplayPort socket ..............37 Fujitsu Technology Solutions...
- Page 8 Contents Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 9: Your Lcd Screen
Landscape and portrait mode • high degree of brightness and good contrast • High resolution – 1680 x 1050 (B22W-6 LED) or 1280 x 1024 (B19-6 LED) • presentation of up to 16.7 million colours (in conjunction with an appropriate display adapter) •... -
Page 10: Further Information
For ergonomic reasons, we recommend a screen resolution of 1680 x 1050 pixels (B22W-6 LED) or 1280 x 1024 pixels (B19-6 LED). Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz. -
Page 11: Important Notes
Use a screen saver with moving images and activate the power management for your monitor to prevent still images from "burning in". • If you operate the device with the swivel arm or wall bracket, it must not be turned by 180°. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 12: Power Cable
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 13: Ce Marking
These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - equivalent to the discharge from 5 million cars. As an Energy Star Partner, Fujitsu Technology Solutions GmbH has determined that this product meets the Energy Star guidelines for energy efficiency. -
Page 14: Disposal And Recycling
Fujitsu America, Inc. Environmental Protection 1250E. Arques Avenue Administration Sunnyvale, CA 94085 U.S.A. Executive Yuan R.O.C. Phone No.: (408) 746-6000 "http://recycle.epa.gov.tw" Information on this subject is also available on the Internet at "http://ts.fujitsu.com/recycling". Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 15: Getting Started
Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device. Setting up the device To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 16: Setting Up An Ergonomic Video Workstation
► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). ► Position the keyboard where it is easiest to reach (1). Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... - Page 17 Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers. For this purpose the monitor base must be removed beforehand as described in Chapter "Removing monitor base", Page Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 18: Mounting The Monitor Base
The inclination of the monitor can be adjusted by -5° (forwards) and +35° (backwards) from its vertical position. ► Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 19: Adjusting The Rotation
VESA FPMPMI using a hole spacing of 100 mm. For instructions on how to mount the swivel arm or wall bracket, please see the documentation for the swivel arm or wall bracket. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 20: Connecting The Device
2 = Security slot for the "Kensington Lock" 7 = D-SUB socket (ANALOG) 3 = USB-IN sockets 8 = AUDIO-IN socket 4 = Power connector 9 = USB-IN sockets 5 = DisplayPort socket (DIGITAL) 10 = USB-OUT socket Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... - Page 21 Getting started B19-6 LED 1 = Holes for fixing swivel arm or wall bracket 4 = AUDIO-IN socket 2 = Security slot for the "Kensington Lock" 5 = DVI-D connector (DIGITAL) 3 = Power connector 6 = D-SUB socket (ANALOG) ►...
-
Page 22: Connecting Cables To The Computer
► Plug the power connector of the computer into a properly grounded mains outlet. If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is active as standard. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 23: Operation
(indication approx. 2 seconds). does not light up The monitor is switched off (or is in power saving mode - power consumption in standby and off mode ≤ 0.5 W ). Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 24: Notes On Power Management
Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the display adapter used. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 25: Changing The Monitor Settings With The Buttons Of The Control Panel
OSD menu is activated, the navigation buttons (softkeys) displayed on the monitor apply. 1 = Buttons for the OSD menu (On 3 = Power supply indicator Screen Display) 4 = Softkeys 2 = ON/OFF switch Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... - Page 26 ► Press the button (upwards arrow) or the button (downwards arrow) to select the desired monitor connection (VGA, DVI or DP). This setting window can also be called when the OSD menu is locked. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 27: Locking The Osd Menu
► Press and hold the INPUT buttons at the same time for a few seconds. The message Power button locked / unlocked is displayed. Proceed in the same way to release the locked ON/OFF switch again. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 28: Changing The Monitor Settings Using The Osd Menu
The main menu appears, with icons for the setting functions. The first symbol, (Brightness/Contrast), is highlighted and the associated functions are visible in the right-hand menu field. ► Press the INPUT button to highlight another icon (e.g. Image adjust). Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... - Page 29 OSD menu functions The OSD menu for analogue monitor operation is described below. During digital operation some functions are not available, they are not needed because of the digital transmission technology being used. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 30: Adjusting The Brightness And Contrast
Full screen = selection of full screen mode Keep aspect = maximum picture size without distortion (only for PC image) 16:9 = 16:9 widescreen format (Video/TV picture only) 4:3 = 4:3 format (Video/TV picture only) Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 31: Adjusting The Volume
With this function you switch the OSD menu from portrait mode to landscape OSD Rotation mode and vice versa. On = The OSD menu is displayed in portrait mode. Off = The OSD menu is displayed in landscape mode. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 32: Displaying Information
Processing is displayed. Displaying information Call the Information setting window With this function the model designation, serial number, resolution, H/V frequency, input signal, colour setting and polarity of the synchronisation signal are displayed. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 33: Notes On Ergonomic Colour Adjustment
+ Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 34: Troubleshooting
Frequency out of range: ## kHz / ## Hz Please change the display mode to 1280 ► Set a different screen resolution using the x 1024 with 60 Hz (B19-6 LED) computer software (see documentation for the computer or display adapter). - Page 35 The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced. ► Contact our Service Desk. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 36: Explanatory Information About Standard Iso 9241-307
The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher. -
Page 37: Technical Specification
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B19-6 LED B22W-6 LED Dimensions and weight Visible diagonals 48.16 cm 55.9 cm Dot pitch 0.098 mm 0.282 mm... -
Page 38: Vesa-Ddc-Compatible Vga Interface
20). For ergonomic reasons, we recommend a screen resolution of 1680 x 1050 pixels (B22W-6 LED) or 1280 x 1024 pixels (B19-6 LED). Because of the technology used (active matrix), an LCD monitor provides a totally flicker-free picture, even with a refresh rate of 60 Hz. -
Page 39: Sub D Port
Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 40: Dvi-D Port
TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0– TMDS Data0+ TMDS Data 0/5 Shield not connected not connected TMDS Clock Shield TMDS Clock+ TMDS Clock– Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 41: Displayport Socket
Lane 3 (positive) Earth Lane 3 (negative) Connected to earth Connected to earth Auxiliary channel (positive) Earth Auxiliary channel (negative) Hot Plug Detect Return for Power Power for connector (3.3 V 500 mA) Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...