Getting Started; Charging The Remote Control - Viper 4708V Owner's Manual

Getting Started

Your Responder LC3 remote is powered by an internal rechargeable
battery that can only be serviced by an authorized Directed dealer.
Due to transit and storage time prior to your purchase, the battery
charge may have depleted. To ensure proper operation, check the
battery level and connect the battery charger if not fully charged. See
Battery Information and Status Screen Icons sections for more informa-
tion about the battery.

Charging the Remote Control

1. Plug the AC adapter into a 110V AC outlet. Insert the mini-USB
connector into the mini-USB port located on the side of the
remote control (see diagram under Responder LC3 2-way). The
text field will display
charging (The remote remains operational while charging and
can command the system).
2. Once fully charged the text field will display
3. The remote control is then ready for use. Disconnect the mini-
USB end from the remote control first and then the AC adapter
from the AC outlet.
If the battery is excessively depleted when the charger is
Note
connected, functionality may be delayed while it charges to
the minimum voltage required to operate the display, after
which normal charging resumes.
4
to indicate the remote control is
charge
.
full
© 2012 Directed. All rights reserved.