How To Connect For Power Control - McIntosh C2200 Owner's Manual

How to Connect for Power Control

The four Power Control Jacks have default settings as ex-
plained on page 8. The hookup example below utilizing the
default settings. If you wish to use any one of the three as-
signable Power Control Outputs as a dedicated Trigger in-
stead, connect that Component Source Unit's Power Control
Input to the desired Trigger Output (A, B, or C). The de-
fault setting in the C2200 Setup needs to be changed to
match the new Power Control Connection.
1. Connect a Control Cable from the C2200 POWER
CONTROL ACCessory Jack to the Power Control In
McIntosh CD Player
McIntosh Power Amplifier
How to Connect for Power Control
on the McIntosh CD Player.
2. Connect a Control Cable from the McIntosh CD Player
Power Control Out Jack to the Power Control In Jack
on the McIntosh Tuner.
3. Connect a Control Cable from the McIntosh Tuner
Power Control Out Jack to the Power Control Jack on
the McIntosh Power Control.
4. Connect a Control Cable from the C2200 MAIN
POWER CONTROL Jack to the Power Control In Jack
on the McIntosh Power Amplifier.
McIntosh AM/FM Tuner
McIntosh
Power Control
9