Front Panel Controls, Displays, Push-Buttons, And Switches - McIntosh C2200 Owner's Manual

INPUT Switch selects
the Program Source
Signals and is used in
Setup Mode
BASS Control TONE BYPASS with
provides 12dB indicator, when acti-
boost or cut vated the audio signal
with a flat cen- totally bypasses the
ter position Tone Control Circuitry
IR Sensor for
Remote Con-
trol Operation
MONO Push-button
with indicator, com-
bines Left and Right
Stereo Signals to
Mono

Front Panel Controls, Displays, Push-Buttons, and Switches

TREBLE Control
provides 12dB
boost or cut with a
flat center position
METERS indicate the
Preamplifier's Left and
Right Channels Relative
Output Level
REC MONITOR
Push-button with
indicator, allows
listening to the
playback of REC/
TAPE Source while
the recording is in
process
SETUP Mode Push-button
with indicator, allows the
changing of the default
settings for Inputs, Levels,
Special Functions and the
Display
DISPLAY indicates the
Sources, Volume/Bal-
ance Levels, Operational
Functions and Setup
Mode Settings
METER LIGHTS
Switches the Meter
Illumination On or
Off, and is used in
the Setup Mode
HEADPHONE OUTPUTS 1 and
Jack accepts 2 Push-buttons
dynamic head- with indicators,
phones allow the C2200
to switch Power
Control and Au-
dio to two sepa-
rate Stereo Power
Amplifiers
MUTE Push-button
mutes audio in
MAIN, OUTPUTS
1&2 and HEAD-
PHONES
VOLUME Control ad-
justs the listening vol-
ume level and is used
for setup functions
BALANCE Control
allows the adjustment
of the relative volume
levels for each channel
and is used for setup
functions
POWER
Switch turns
all AC power
completely On
or Off
STANDBY/ON Push-button
turns the C2200 On, or Off
(Standby). The LED Indica-
tor illuminates when there is
incoming AC Power
13