Remote Control Push-Buttons - McIntosh C2200 Owner's Manual

Turns AC Power ON or OFF to
certain McIntosh Components
when connected via the Data Port
Selects Functions for McIntosh
Home Controller and as a "shift"
key when used with the AM or FM
push-buttons to select Output
(Spkr) 1 or 2
Switches OFF the entire
C2200 System
Use to select tuner pre-
sets, disc tracks or any
numbered operation
Selects Switched Output 1,
AM Tuner Operating Func-
tions and Disc Selection on
certain McIntosh CD Players
Press TRIM and then
the LEVEL Push-but-
tons to select and ad-
just various functions
Mutes the audio
Selects Disc Player, Mu-
sic Server or Tape Re-
corder Functions and also
performs various func-
tions on a variety of
McIntosh Components
Selects one of the twelve
High Level Audio/Video
Sources or Phono Input
Notes: Push-buttons whose function is not identified above are for use with other
22
LED illuminates during
the time a remote com-
mand is sent to the C2200
McIntosh Products. The Remote Control shipped with your C2200 may
differ from the illustration above; however, the functionality is the same.
Press to Power the
Press MODE to switch between
C2200 ON or OFF
Stereo or Mono Modes

Remote Control Push-Buttons

Press to Power ON
the C2200
Press to Power OFF
the C2200
Selects Switched Output
2, FM Tuner Operating
Functions and Track Se-
lection on certain McIn-
tosh CD Players
Press to REVIEW Tuner
Station Presets and selects
certain functions on McIn-
tosh CD Players
Adjusts the volume
level up or down
Selects On Screen Func-
tions for McIntosh DVD
Players and certain CD
Players
Selects the FF (Fast For-
ward) or REWind Mode
on a Disc Player, Music
Server or Tape Recorder;
tunes Up or Down the
AM/FM Dial