Front Panel Controls, Displays, Push-Buttons, And Switches - McIntosh C46 Owner's Manual

BALANCE control
allows the adjustment
of the relative volume
levels for each channel
and is used for setup
functions
RECORD control selects
the program signals that
are available to record
from and is used for setup
functions
REC PROCESSOR
Push-button turns
the Record Proces-
sor loop On or Off
LIS PROCESSOR
Push-button turns
the Listen Proces-
sor loop On or Off
REC MONITOR Push-button
switches the RECORD Output
signals to the Listen circuit so
the Program Signals sent to the
Record Outputs are audible
12

Front Panel Controls, Displays, Push-Buttons, and Switches

DISPLAY indicates the
Sources, Volume/Bal-
ance Levels, Operational
Functions and Setup
Mode Settings
MONO Push-button
combines left and
right stereo signals
to mono at all Main,
Amplifier and Listen
Outputs
SETUP Mode Push-button
allows the changing of the
default settings for Inputs,
Levels, Special Functions
and the Display
LISTEN control selects
the program signals
that are listened to and
unbalanced outputs
Tone Controls pro-
vide 10dB of boost or
cut at the center fre-
quencies indicated
above each control
HEADPHONES MUTE Push-
jack accepts dy- button mutes
namic head- audio in all
phones Listen outputs
TONE BYPASS Push-
button allows the au-
dio signal to totally
bypass the Equalizer
Control Circuitry
VOLUME control
adjusts the listening
volume level and is
used for setup func-
tions
IR Sensor receives
commands from a
Remote Control
POWER
Switch
switches all
AC Power
completely
On or Off
OUTPUTS 1 and 2
Push-buttons allow the
C46 to switch Power
Control and Audio to
two separate stereo
Power Amplifiers
STANDBY/ON
Push-button turns
the C46 ON or
OFF (Standby)