About The Control Panel; Setup - ResMed AirCurve 10 VAuto User Manual

About the control panel

Start/Stop button
Dial
Home button
Different icons may be displayed on the screen at different times including:
Ramp Time
Wireless signal strength
(green)
Wireless transfer not
enabled (grey)

Setup

1. Place the device on a stable level surface.
2. Plug the power connector into the rear of the device. Connect one end of the power cord into
the power supply unit and the other end into the power outlet.
3. Connect the air tubing firmly to the air outlet located on the rear of the device.
4. Connect the free end of the air tubing firmly onto the assembled mask.
See your mask user guide for detailed information.
Recommended masks are available on www.resmed.com.
Press to start/stop therapy.
Press and hold for three seconds to enter power save
mode.
Turn to navigate the menu and press to select an option.
Turn to adjust a selected option and press to save your
change.
Press to return to the Home screen.
No wireless connection
Airplane Mode
English 3