Flashlight - Drill Master 93816 Assembly And Operating Instructions Manual

WARNING: Always make sure the Battery (47) of the Flashlight is removed and the Bulb
(9a) is allowed to cool prior to making any adjustments to the tool.
1. Insert the fully charged Battery (47) in the Flashlight's Handle, and make sure that
the Battery snaps into place on the Handle.
(See illustration above.)
2. Slide the Switch Button (7a) on the Handle to the ON position.
3. To turn off the Flashlight, slide the Switch Button (7a) to its OFF position.
4. Bulb (9a) Replacement:
A. Unscrew the Holding Ring (4a) and remove the Lens (6a), and Reflector (5a).
You can now access the spare Bulb hidden behind the Reflector (5a) in the
Lamp Housing (3a).
B. Remove the Bulb Bracket (11a) by turning it clockwise.
C. Remove the old Bulb (9a). Transfer the Bulb Spring (10a) from the old Bulb to
the new Bulb.
D. Insert a Bulb of the same type and wattage. Align the Bulb Bracket (11a) with
the slots in the Reflector, push and hold it in, and turn it counterclockwise.
E. Put the Reflector (5a) back in place. Reattach the Lens (6a) and Holding Ring
(4a).
SKU 93816 For technical questions, please call 1-800-444-3353.

Flashlight

Page 12