System Board - HP ProDesk 600 G1 Tower Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material.
NOTE:
System board appearance may vary.
Description
System board for use in models without Windows 8
System board for use in models with Windows 8 Standard
System board for use in models with Windows 8 Professional
System board for use in models with NetClone
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
Memory modules
●
Expansion cards
●
Fan sink
●
Processor
●
4. Disconnect all cables connected to the system board, noting their location for reinstallation.
5. If a PCI expansion slot daughter card is installed, remove the two Torx T15 screws (1) that secure
the PCI extension board to the chassis.
82 Chapter 5 Removal and replacement procedures: Tower (TWR)
(Access panel on page
(Memory on page
(Expansion cards on page
(Fan sink on page 69).
(Processor on page 71)
(Preparation for disassembly on page
37).
42)
45)
Spare part number
696794-001
696794-501
696794-601
726848-001
36).